Voodoo Lab je bezesporu špičkou mezi napaječi a najdete jej v pedalboardech snad všech významných muzikantů.

Kvalitní efekty s ním mají výrazně lepší zvuk (neuvěřitelné, ale my tu zkušenost máme potvrzenou)

Je naprosto stabilní a nezklame.

Power AC - finální řešení napájení

Profesionální řešení napájení  pro lampové overdrivy, pedály nebo další periferie  přes Whammy, POD, Rotosphere a další a další… .

Power AC má dva 9VAC výstupy a dva volitelné výstupy mezi 9VAC a 12VAC. Mezi výhody patří toroidální tranformátor a kompletně odizolované výstupy zaručující absolutně tichý provoz. Součástí jsou kabely a napájecí kabel. Vyrobeno v USA a navíc, výrobce nabízí prodlouženou záruku. Tento Power AC je plně evropská verze pro 240V.

Toroidal power transformer

Outputs: 5.5x2.5mm barrel connectors

•  2x 9VAC at 600mA
•  Two selectable 9/12VAC at 1200mA
•  Short circuit and overcurrent protected.

Rozměry:  152x86x45mm

0.9 kg

Voodoo Lab Pedal Power AC - pedalboard power supply designed to operate high current and AC-powered pedal effects.

Professional solution for powering tube overdrives, modelling pedals or devices including the Whammy, POD, Rotosphere and many others without wall warts.

Provides 2x 9VAC and 2x selectable 9VAC or 12VAC outputs, includes a toroidal transformer and completely isolated outputs to ensure noise-free operation, includes cables and detachable AC power cable.

Connections

The Voodoo Lab Pedal Power AC has four outputs and six output jacks. These accept barrel

type connectors and have a 2.5mm center pin.

The two individual 9VAC outputs on the left will provide up to 600mA each.

The two pairs of jacks on the right will provide up to 1200mA each at either 9VAC or

12VAC.

Select the correct voltage by using the corresponding jack.

!!!!! You can’t use both 9VAC and 12VAC from the same pair at the same time. It won’t work. Don’t even try.

Cables

Two different cable types are provided with the Pedal Power AC. The most common type

has red connectors on both ends. The other type has red and black connectors.

Red connectors are 2.5mm center and black are 2.1mm. Connect red ends to the Pedal Power

AC.

Most AC powered devices will also use the red 2.5mm plugs, however a few use black 2.1mm

(the industry standard is to use 2.5mm for AC and 2.1mm for DC).

Since the red plug has a hole to accomodate the 2.5mm pin, it will also fit over the smaller

2.1mm. Don’t do this! It will appear to work, but since the connectors do not mate snugly,

the connections will be unreliable.

How can you tell which to use? Easy! Try the smaller black end first. If it fits, use it. If it

doesn’t, use a red one.

If you need additional cables they are available directly from Voodoo Lab. Visit

www.voodoolab.com/cables for more information.